MK-1CH-relay

Mains voltage control unit which is typically used to control non-dimmable luminaires, power sockets, and other electrical devices. The relay output is potential free, so it can be used as a digital output with low voltage devices. In addition to the relay output, the device has two inputs.

image

Installation instructions

  • N - Terminal for Neutral
  • L - Terminal for Live
  • I1 - Input terminal 1
  • I2 - Input terminal 2
  • Power Input terminal
  • Power Output terminal
image

icon

Warning

During the installation of the product, the supply voltage MUST BE DISCONNECTED.

Please directly disconnect it from the breaker box to avoid any risk of electrocution. Installation must be conducted by a certified professional.

The module must be installed and connected following the diagram(s) presented in this user guide. Mount Kelvin will not be responsible for any loss or damage resulting from a none respect of the instructions of this user guide.

Specifications

PropertyValue
Power supply
230 V AC +/-10% 50 Hz
Maximum output power
Resistive load max. 10 A / 2300 W
Capacitive load max. 3 A / 690 W
Operational temperature
0 °C to 40 °C
Radio
2.4 GHz Bluetooth
Protocol
Wirepas
Range
30m
Protection rating
IP 2X
Dimensions
40 * 45 * 16,9 mm