Maintenance

Maintenance

Maintenance

Replace a wireless switch

  1. Select the room control kit tab
  2. Open the assign/unassign menu under “EnOcean devices”
  3. Remove the old switch by clicking on the crossmark on the right-hand side.
  4. Select assign and press the new switch’s push buttons two times to pair it with the system.
image

Replace a room control kit / SD card

  1. Select the room control kit tab
  2. Open replace menu under “Room control kit ID”
  3. Write the new room control kit’s or SD card’s ID on the pop-up menu and select replace
image

Replace a DALI device

  1. Select the room control kit tab
  2. Open the assign/unassign menu under “DALI devices”
  3. Unassign and delete the broken DALI device from Fleet Manager.
  4. Install the new DALI device into the DALI bus.
  5. Open the room control kit tab and select discover devices under “DALI devices”
  6. Open the assign/unassign menu under DALI devices and assign the new DALI device.
image

💠